#include?“8035.h“

extern?UINT8?QND_ReadReg（UINT8?adr）;
extern?UINT8?QND_WriteReg（UINT8?adr?UINT8?value）;


#define?R_TXRX_MASK????0x30
uint32_t???qnd_Crystal?=?QND_CRYSTAL_DEFAULT;
UINT8???qnd_PrevMode;
UINT8???qnd_Country??=?COUNTRY_CHINA?;
UINT16??qnd_CH_START?=?7600;
UINT16??qnd_CH_STOP??=?10800;
UINT8???qnd_CH_STEP??=?1;

UINT8??qnd_AutoScanAll?=?0;
UINT8??qnd_IsStereo;
UINT8??qnd_ChCount;
UINT8??qnd_R16;?
UINT8??qnd_R17;
UINT8??qnd_R46;
UINT16?qnd_ChList[QN_CCA_MAX_CH];
UINT8???qnd_StepTbl[3]={51020};
QND_SeekCallBack?qnd_CallBackFunc?=?0;



/**********************************************************************
void?QNF_RXInit（）
**********************************************************************
Description:?set?to?SNR?based?MPX?control.?Call?this?function?before?
?????????????tune?to?one?specific?channel

Parameters:
None
Return?Value:
None
**********************************************************************/
void?QNF_RXInit（）
{
????QNF_SetRegBit（0x1B0x080x00）;?//Let?NFILT?adjust?freely
????QNF_SetRegBit（0x2C0x3F0x12）;?//When?SNR????QNF_SetRegBit（0x1D0x400x00）;//Let?ccfilter3?adjust?freely
????QNF_SetRegBit（0x410x0F0x0A）;//Set?a?hcc?index?to?trig?ccfilter3‘s?adjust
????QND_WriteReg（0x450x50）;//Set?aud_thrd?will?affect?ccfilter3‘s?tap?number
????QNF_SetRegBit（0x400x700x70）;?//snc/hcc/sm?snr_rssi_sel;?snc_start=0x40;?hcc_start=0x30;?sm_start=0x20
????QNF_SetRegBit（0x190x800x80）;?//Use?SNR?for?ccfilter?selection?criterion
????QNF_SetRegBit（0x3E0x800x80）;?//it?is?decided?by?programming?this?register
????QNF_SetRegBit（0x410xE00xC0）;//DC?notching?High?pass?filter?bandwidth;?remove?low?freqency?dc?signals????????
????QNF_SetRegBit（0x420x100x10）;//disable?the?vtune?monitor
????QNF_SetRegBit（0x34?0x7FSMSTART_VAL）;?//set?SNCSTART
????QNF_SetRegBit（0x350x7FSNCSTART_VAL）;?//set?SNCSTART
????QNF_SetRegBit（0x360x7FHCCSTART_VAL）;?//set?HCCSTART
}

/**********************************************************************
void?QNF_SetMute（UINT8?On）
**********************************************************************
Description:?set?register?specified?bit

Parameters:
On:????????1:?mute?0:?unmute
Return?Value:
None
**********************************************************************/
void?QNF_SetMute（UINT8?On）
{
	if（On）
	{
????????QNF_SetRegBit（0x4C?0x0B?0x0B）;
	}
	else
	{
????????QND_Delay（QND_DELAY_BEFORE_UNMUTE）;
????????QNF_SetRegBit（0x4C?0x0B?0x00）;
	}
}

/**********************************************************************
void?QNF_SetRegBit（UINT8?reg?UINT8?bitMask?UINT8?data_val）
**********************************************************************
Description:?set?register?specified?bit

Parameters:
????reg:????????register?that?will?be?set
????bitMask:????mask?specified?bit?of?register
????data_val:????data?will?be?set?for?specified?bit
Return?Value:
????None
*****************************

?屬性????????????大小?????日期????時間???名稱
-----------?---------??----------?-----??----

?????文件??????27588??2012-08-08?10:39??QN8035驅動\8035.c

?????文件??????12822??2012-07-31?14:07??QN8035驅動\8035.h

?????文件???????8343??2012-08-08?11:49??QN8035驅動\qnio.c

?????文件???????2572??2012-08-09?15:37??QN8035驅動\qnio.h

?????目錄??????????0??2012-08-16?12:08??QN8035驅動

-----------?---------??----------?-----??----

????????????????51325????????????????????5