一、添加單板信息??
1、???
cp?-r?board/samsung/smdkc100?board/samsung/smdkv210??
??
2、進入smdkv210下??
????cd?board/samsung/smdkv210/??
????mv?smdkc100.c?smdkv210.c??

3、修改Kconfig??
????if?TARGET_SMDKV210??
??
????config?SYS_BOARD??
????????????default?“smdkv210“??
??
????config?SYS_VENDOR??
????????????default?“samsung“??
??
????config?SYS_SOC??
????????????default?“s5pv2xx“??
??
????config?SYS_CONFIG_NAME??
????????????default?“smdkv210“??
??
????endif???????
???????????????????????????????????????????????????????????????????????????????????????????????????????
4、修改MAINTAINERS??
SMDKV210?BOARD??
M:??????Minkyu?Kang???
S:??????Maintained??
F:??????board/samsung/smdkv210/??
F:??????include/configs/smdkv210.h??
F:??????configs/smdkv210_defconfig??

5、修改Makefile??
obj-y???:=?smdkv210.o??
obj-$（CONFIG_SAMSUNG_ONENAND）???+=?onenand.o??
obj-y???+=?lowlevel_init.o??

6、根據MAINTAINERS修改includ/configs/smdkv210.h?和configs/smdkv210_defconfig??
cp?include/configs/smdkc100.h?include/configs/smdkv210.h??
cp?configs/smdkc100_defconfig?configs/smdkv210_defconfig
???
7、修改smdkv210_defconfig??
CONFIG_ARM=y
CONFIG_ARCH_S5PV2XX=y
CONFIG_TARGET_SMDKV210=y
CONFIG_IDENT_STRING=“?for?SMDKV210“
CONFIG_DEFAULT_DEVICE_TREE=“s5pv2xx-smdkv210“
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS=“root=/dev/mtdblock5?ubi.mtd=4?rootfstype=cramfs?console=ttySAC0115200n8?mem=128M??mtdparts=s3c-onenand:256k（bootloader）128k@0x40000（params）3m@0x60000（kernel）16m@0x360000（test）-（UBI）“
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT=“SMDKV210?#?“
#?CONFIG_CMD_IMLS?is?not?set
#?CONFIG_CMD_FLASH?is?not?set
CONFIG_CMD_ONENAND=y
#?CONFIG_CMD_SETEXPR?is?not?set
CONFIG_CMD_CACHE=y
CONFIG_CMD_FAT=y
CONFIG_CMD_MTDPARTS=y
CONFIG_ENV_IS_IN_ONENAND=y
#?CONFIG_MMC?is?not?set

8、修改smdkv210.h
#define?CONFIG_SAMSUNG		1	/*?in?a?SAMSUNG?core?*/
#define?CONFIG_S5P		1	/*?which?is?in?a?S5P?Family?*/
#define?CONFIG_S5PV210		1	/*?which?is?in?a?S5PV210?*/
#define?CONFIG_SMDKV210		1	/*?working?with?SMDKV210?*/?

/*?DRAM?base?*/
#define?CONFIG_SYS_SDRAM_base		0x20000000

/*?Text?base?*/
#define?CONFIG_SYS_TEXT_base		0x20000000
#define?PHYS_SDRAM_1_SIZE	（1024?<#define?CONFIG_SYS_INIT_SP_ADDR	（CONFIG_SYS_SDRAM_base?+?PHYS_SDRAM_1_SIZE）

二、添加S5PV210信息??
1、進入arch/arn目錄下??
cd?arch/arm??
??
vim?Kconfig??
??
/*add?by?xcl*/
config?ARCH_S5PV2XX
	bool?“Samsung?S5PV2XX“
	select?CPU_V7
	select?DM
	select?DM_SERIAL
	select?DM_GPIO
	select?DM_I2C?
??
/*add?by?xcl*/?
source?“arch/arm/mach-s5pv2xx/Kconfig“
??
2、修改Makefile??
vim?Makefile??
??
/*add?by?xcl*/??
machine-$（CONFIG_ARCH_S5PV2XX）		+=?s5pv2xx
??
3、復制mach-s5pc1xx??
cp?-r?mach-s5pc1xx?mach-s5pv2xx??
??
4、修改mach-s5pv210目錄下Kconfig??
cd?mach-s5pv210/??
??
vim?Kconfig??
??
if?ARCH_S5PV2XX

choice
	prompt?“S5PV2XX?board?select“
	optional

config?TARGET_SMDKV210
	bool?“Support?smdkv210?board“
	select?OF_CONTROL

endchoice

?屬性????????????大小?????日期????時間???名稱
-----------?---------??----------?-----??----

?????文件???19816482??2017-10-29?14:02??u-boot-2017.07移植到S5PV210單板（教程加對應源碼）\uboot2017.07.tar.bz2

?????文件??????18722??2017-10-29?14:08??u-boot-2017.07移植到S5PV210單板（教程加對應源碼）\添加單板.c

?????目錄??????????0??2017-10-29?14:11??u-boot-2017.07移植到S5PV210單板（教程加對應源碼）

-----------?---------??----------?-----??----

?????????????19835204????????????????????3