HP官方Vpro功能設置工具，iso直接可制作DOS啟動盤。 The instructions of how to use the tool: Preparations: 1. Make an MS DOS bootable USB hard disk. 2. Unzip the zipped tool file and copy all onto the USB hard disk. 3. Remove Power-on password if there is any. 4. Suggest change the system boot-order to "USB Hard Disk FIRST" from F10 setup. Operation Steps: 1. Make sure power is off. 2. Attach the USB hard disk to the system. 3. Boot system to USB hard disk. The display will stop at VPro Uncommitted Descriptor Unlocked Management Engine disabled Flash Protection Override disabled **************************************** Do you want to enable or disable AMT now [Y, N]? 4. After you make a choice, the system will be configured and rebooted. At final, it will display either 1). AMT-Enabled VPro Enabled Descriptor Locked Management Engine enabled Flash Protection Override disabled or, 2). AMT-Disabled VPro Disabled Descriptor Locked Management Engine disabled Flash Protection Override disabled **Note: If to re-run the tool, simply either execute autoexec.bat, or reboot the system.